Ricoh Priport HQ9000 Operating Instructions - Page 56
Placing Originals
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Basics Placing Originals When using the exposure glass, place the originals face down. Placing Originals in the Auto When using the ADF, place the origi- Document Feeder nals face up. 2 A Adjust the guide to the original size. Placing Originals on the Exposure Glass B Insert the aligned originals face up into the ADF. A Lift the exposure glass cover. AJK109S Note ❒ Be sure to lift the exposure glass cover more than 30 degrees. B Place the original face down on the exposure glass. The original should be aligned with the left scale. ACY058S 1. Left scale 2. Positioning mark C Lower the exposure glass cover. 44 AJK153S Note ❒ To avoid originals misfeeding, fan the originals before placing them in the ADF. Limitation ❒ Approximately 50 originals (80 g/m2, 20 lb) can be inserted at a time in the ADF. The first (top) original will be fed first. Note ❒ To avoid jamming, fan the orig- inals before placing them in the ADF. ❒ The guides must fit snugly against both sides of the stack. C Adjust print settings as necessary, and then press the {Start} key. Note ❒ If the next original has been placed in the ADF before the machine stops, that original is fed automatically.