Ricoh Priport HQ9000 Operating Instructions - Page 47
Adjusting the Paper Alignment Wings, and Chocks, Paper alignment wings, Chocks
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Printing Preparations Adjusting the Paper Alignment Wings and Chocks ❖ Paper alignment wings Adjust the paper alignment wings. Use the paper alignment wings and chocks to stack printed paper neatly. Note ❒ Prints may be delivered curled up if they contain large areas of solid image. If this happens, raise the paper alignment wings to about 45 degrees. When printing on B5 JISL K or A4K of 52.3 g/m2, 13.9 lb or thinner, slide the chocks up together. 2 ACY053S ❒ Depending on the type of paper you are using, you may not be able to load to capacity (1000 sheets) when the wings are raised. ❒ When printing on 52.3 g/m2, 13.9 lb or thinner at a fast speed, paper jams (C) may occur in the paper exit area. If this happens, do the following: • Decrease print speed. 1. Raise the wings fully. 2. Raise the wings to about 45 de- grees. ❖ Chocks Slide the chocks up or down to adjust the buffer fins to match the paper size and thickness. Reference p.57 "Changing the Printing Speed" • Lower the paper alignment wings. • Push the end plate toward the paper delivery tray edge. ❒ When the paper alignment wings are raised, prints may not be delivered neatly stacked, depending on paper type. If this happens, lower the wings. ACY054S Adjust the paper alignment wings and chocks according to paper size and thickness, as follows: 35