Ricoh Priport HQ9000 Operating Instructions - Page 144
Clearing Misfeeds
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Troubleshooting x Clearing Misfeeds R CAUTION: • Be careful not to cut yourself on any sharp edges when you reach -To prevent paper misfeeds: inside the machine to remove Check the following before restarting misfed sheets of paper or mas- the printing run. ters. • Did you select an appropriate pa- per type with [Feed Tray Paper Note Type]? ❒ After clearing misfeeds, make sure that all the doors, covers, and units 4 are closed and the x indicator is off. ❒ To prevent misfeeds, do not leave any torn scraps of paper, originals, or masters in the machine. ❒ When clearing misfeeds, do not turn off the main switch. If you do, your print settings will be cleared. ❒ The master eject unit or the drum unit may be locked if the security mode is active. Enter the security code or ask your administrator if necessary. • Are the side pads in the correct positions? ❒ If misfeeds occur repeatedly, contact your service representative. "x + A" Paper Misfeeds in the Paper Feed Section A Remove the misfed paper. ZDCY140E To print on thin paper (47.1 g/m2, 12.5 lb), slide the levers behind the paper feed side plates in the direction of the arrow (see illustration). • When paper is curled, correct as shown. 132 GRCURL0E