Samsung ML-3712DW User Manual (user Manual) (ver.1.02) (English) - Page 151
Using a network cable
View all Samsung ML-3712DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Wireless network setup 2. Using a network-connected machine 48 Before entering the IP address for the machine, you must know the computer's network configuration information. If the computer's network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer's network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example: If the computer's network information is as shown follows: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine's network information should be as below: - IP address: 169.254.133.43 - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 16 The wireless network connects according to the network configuration. 17 When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 18 Follow the instructions on the screen to complete the installation. After the installation is finished, click Quit or Restart. 19 Using a network cable Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures.