Samsung SCX4521F User Manual (ENGLISH) - Page 34
ID Card Copying, 2 Up or 4 Up Copying, Poster Copying, Reduce, Enlarge, Start, Enter, Stop/Clear - scan driver
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See "Setting Copy Options" on page 4.3. NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button while Auto Fit copying is enabled. 6 Press Start to begin copying. ID Card Copying You can copy both sides of the ID Card like a drivers licence to a single side of paper. When you copy using this feature, the machine prints one side of the card on the upper half of the paper and the other side on the lower half without reducing the size of the original. If the loaded card is larger than the printable area, some portions may not be printed. This special copy feature can be applied only when you place a document on the document glass. If a document is detected in the ADF, ID Card copying feature does not work. 1 Place the ID Card to be copied on the document glass and close the cover. 2 Press Menu until "Copy Feature" appears on the top line of the display. 3 Press the scroll button ( or ) until "ID Card Copy" displays on the bottom line. 4 Press Enter to make your selection. 5 If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See "Setting Copy Options" on page 4.3. 6 Press Start to begin copying. Your machine begins scanning the front side. 7 When "Set Backside" displays on the bottom line, open the document cover and turn the card over. Close the cover. NOTE: If you press the Stop/Clear button or if no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to Standby mode. 8 Press Start again. 2 Up or 4 Up Copying 2 This copy feature is available only when you load documents in the ADF. 1 1 2-up copying 2 1 2 3 3 4 4 5 4-up copying Load the documents to be copied in the ADF. Press Menu until "Copy Feature" appears on the top line of the display. Press the scroll button ( or ) until "2 UP" or "4 UP" displays on the bottom line. Press Enter to make your selection. If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See "Setting Copy Options" on page 4.3. NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button for making a 2 or 4 Up copy. 6 Press Start to begin copying. Poster Copying This special copy feature can be applied only when you place a document on the document glass. If a document is detected in the ADF, the Poster copying feature does not work. 1 Place the document to be copied on the document glass and close the cover. 2 Press Menu until "Copy Feature" appears on the top line of the display. 3 Press the scroll button ( or ) until "Poster" displays on the bottom line. 4 Press Enter to make your selection. 5 If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See "Setting Copy Options" on page 4.3. NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button when making a poster. 6 Press Start to begin copying. Your original document is divided into 9 portions. Each portion is scanned and printed one by one in the following order: 4.5 Copying