Home » Samsung Manuals » Multifunction Devices » Samsung SCX4521F » Manual Viewer

Samsung SCX4521F User Manual (ENGLISH) - Page 35

Changing the Default Settings, Setting the Time Out Option, Enter, Stop/Clear, Start, Favorite Copy

UPC - 635753616040

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Changing the Default Settings The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the corresponding buttons on the control panel. To create your own default settings: 1 Press Menu on the control panel until "Copy Setup" appears on the top line of the display. The first menu item, "Default-Change", appears on the bottom line. 2 Press Enter to access the menu item. The first setup option, "Darkness", appears on the bottom line. 3 Press the scroll button ( or ) to scroll through the setup options. 4 When the option you want to set appears, press Enter to access the option. 5 Change the setting using the scroll button ( or ). For the SCX-4521F, you can enter the value using the number keypad. 6 Press Enter to save the selection. 7 Repeat steps 3 through 6, as needed. 8 To return to Standby mode, press Stop/Clear. NOTE: While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores their default status. Setting the Favorite Copy Option You can set Favorite Copy on the control panel works as a special copy button. Assign one of the copy feature to Favorite Copy for quick accessing. 1 Press Menu on the control panel until "Copy Setup" appears on the top line of the display. 2 Press the scroll button ( or ) to display "Favorite Copy" on the bottom line. 3 Press Enter to access the menu item. 4 Press the scroll button ( or ) until the feature you want appears on the display. You can select from Clone, Copy Collate, Auto fit, ID Card Copy, 2 Up, 4 Up, and Poster. See "Using Special Copy Features" on page 4.4 for details about each feature. 5 Press Enter to make your selection. To use the special copy feature quickly, press Favorite Copy then you will see the assigned special copy feature on the display. Press Enter to start copy job. Setting the Time Out Option You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel. 1 Press Menu on the control panel until "Copy Setup" appears on the top line of the display. 2 Press the scroll button ( or ) to display "Timeout" on the bottom line. 3 Press Enter to access the menu item. 4 Press the scroll button ( or ) until the status you want appears on the display. You can select from 15, 30, 60, and 180 (seconds). Selecting "Off" means that the machine does not restore the default settings until you press Start to begin copying, or Stop/Clear to cancel. 5 Press Enter to make your selection. 6 To return to Standby mode, press Stop/Clear. 4.6 Copying

Section	Page
Guide_EN	1
Contents	5
Introduction	12
Special Features	12
Understanding Component Locations	13
Front View	13
Rear View	13
Control Panel Functions	14
Getting Started	15
Unpacking	15
Selecting a Location	16
Installing the Toner Cartridge	16
Loading Paper	17
Making Connections	18
Turning the Machine On	20
Installing Printer Software	21
System requirements	21
Printer Driver Features	22
Changing the Display Language and Country	23
Setting Language	23
Setting Country	23
Setting the Machine ID (Only for SCX-4521F)	23
Entering Characters Using the Number Keypad	23
Setting the Date and Time (Only for SCX-4521F)	24
Changing the Clock Mode	24
Setting the Paper Size and Type	25
Setting Sounds (Only for SCX-4521F)	25
Speaker, Ringer, Key Sound, and Alarm Sound	25
Speaker Volume	25
Using the Save Modes	26
Toner Save Mode	26
Power Save Mode	26
Setting the Dial Mode (Only for SCX-4521F)	26
Paper Handling	27
Selecting Print Materials	27
Paper Type, Input Sources, and Capacities	27
Guidelines for Paper and Special Materials	28
Loading Paper	29
Using the Tray	29
Using the Manual Tray	29
Verifying an Output Location	29
Copying	30
Loading Paper for Copying	30
Preparing a Document	30
Making Copies on the Document Glass	31
Making Copies from the Automatic Document Feeder	31
Setting Copy Options	32
Darkness	32
Original Type	32
Reduced/Enlarged Copy	32
Number of Copies	32
Using Special Copy Features	33
Clone Copying	33
Collation Copying	33
Auto Fit Copying	33
ID Card Copying	34
2 Up or 4 Up Copying	34
Poster Copying	34
Changing the Default Settings	35
Setting the Time Out Option	35
Setting the Favorite Copy Option	35
Basic Printing	36
Printing a Document	36
Canceling a Print Job	36
Scanning	37
Scanning Basics	37
Scanning From the Control Panel to an Application	37
Faxing (Only for SCX-4521F)	38
Setting Up the Fax System	38
Sending a Fax	38
Receiving a Fax	38
Automatic Dialing	38
Other Ways to Fax	38
Additional Features	38
Changing the Fax Setup options	38
Available Fax Setup Options	38
Loading a Document	40
Adjusting the Document Resolution	41
Sending a Fax Automatically	41
Sending a Fax Manually	42
Redialing the Last Number	42
Confirming Transmission	42
Automatic Redialing	42
About Receiving Modes	43
Loading Paper for Receiving Faxes	43
Receiving Automatically in Fax Mode	43
Receiving Manually in Tel Mode	43
Receiving Automatically in Ans/ Fax Mode	43
Receiving Manually Using an Extension Telephone	44
Receiving Faxes Using the DRPD Mode	44
Receiving Faxes in the Memory	44
Speed Dialing	45
Storing a Number for Speed Dialing	45
Sending a Fax using a Speed Dial Number	45
Group Dialing	45
Setting a Group Dial Number	45
Editing Group Dial Numbers	46
Sending a Fax Using Group Dialing (Multi-address Transmission)	46
Searching for a Number in Memory	46
Searching Sequentially through the Memory	46
Searching with a Particular First Letter	47
Printing a Phonebook List	47
Sending Broadcast Faxes	47
Sending a Delayed Fax	48
Sending a Priority Fax	48
Adding Documents To a Scheduled Fax	49
Canceling a Scheduled Fax	49
Using Secure Receiving Mode	50
Printing Reports	50
Using Advanced Fax Settings	51
Changing Setting Options	51
Advanced Fax Setting Options	51
Maintenance	52
Clearing the Memory	52
Setting the Machine to be Checked by Phone (Only for SCX-4521F)	53
Cleaning Your Machine	53
Cleaning the Outside	53
Cleaning the Inside	53
Cleaning the Scan Unit	54
Maintaining the Toner Cartridge	54
Redistributing Toner	55
Replacing the Toner Cartridge	55
Setting the Notify Toner Option (Only for SCX-4521F)	55
Cleaning the Drum	56
Ignoring the Toner Empty Message (Only for SCX-4521F)	56
Consumables and Replacement Parts	56
Replacing the ADF Rubber Pad	57
Troubleshooting	58
Clearing Document Jams	58
Input Misfeed	58
Exit Misfeed	59
Clearing Paper Jams	59
In the Tray	59
In the Manual Tray	59
In the Fuser Area or Around the Toner Cartridge	60
In the Paper Exit Area	60
Tips for Avoiding Paper Jams	61
Clearing LCD Error Messages	61
Solving Other Problems	63
Paper Feeding Problems	63
Printing Problems	64
Printing Quality Problems	65
Copying Problems	67
Scanning Problems	68
Fax Problems (Only for SCX-4521F)	68
Common Linux Problems	69
Common Macintosh Problems	70
Problems in Printer Setup Utility	70
Specifications	71
General Specifications	71
Scanner and Copier Specifications	72
Printer Specifications	72
Facsimile Specifications (Only for SCX-4521F)	73
Paper Specifications	73
Overview	73
Supported Sizes of Paper	74
Guidelines for Using Paper	74
Paper Specifications	75
Paper Output Capacity	75
Paper Storage Environment	75
Index	77
Numerics	77
A	77
B	77
C	77
D	77
E	77
F	77
G	77
I	77
J	77
L	77
M	77
N	78
P	78
R	78
S	78
T	78
U	78
V	78
W	78
Z	78
Software section	79
Software section Contents	80
Installing Printer Software in Windows	83
Installing Printer Software	83
Reinstalling Printer Software	85
Removing Printer Software	85
Basic Printing	86
Printing a Document	86
Printing to a file (PRN)	87
Printer Settings	87
Layout Tab	88
Paper Tab	88
Graphics Tab	89
Extras Tab	90
About Tab	90
Printer Tab	90
Using a Favorite Setting	91
Using Help	91
Advanced Printing	92
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	92
Printing Posters	93
Printing a Reduced or Enlarged Document	93
Fitting Your Document to a Selected Paper Size	93
Using Watermarks	94
Using an Existing Watermark	94
Creating a Watermark	94
Editing a Watermark	94
Deleting a Watermark	94
Using Overlays	95
What is an Overlay?	95
Creating a New Page Overlay	95
Using a Page Overlay	95
Deleting a Page Overlay	95
Sharing the Printer Locally	96
Setting Up a Host Computer	96
Setting Up a Client Computer	96
Using Smart Panel	97
Understanding Smart Panel	97
Opening the Troubleshooting Guide	97
Changing the Smart Panel Program Settings	98
Scanning	99
Scanning Using Samsung SmarThru	99
Uninstalling Samsung SmarThru	99
Using Samsung SmarThru	99
Using Onscreen Help File	100
Scanning Process with TWAIN- enabled Software	101
Scanning Using the WIA Driver	101
Windows XP	101
Windows Vista	101
Windows 7	101
Using Your Printer in Linux	102
Getting Started	102
Installing the Unified Linux Driver	102
Installing the Unified Linux Driver	102
Uninstalling the Unified Linux Driver	103
Using the Unified Driver Configurator	104
Opening the Unified Driver Configurator	104
Printers Configuration	104
Scanners Configuration	105
Ports Configuration	105
Configuring Printer Properties	106
Printing a Document	106
Printing from Applications	106
Printing Files	107
Scanning a Document	107
Using the Image Manager	108
Using Your Printer with a Macintosh	110
Installing Software	110
Setting Up the Printer	111
For a Network-connected	111
For a USB-connected	111
Printing	112
Printing a Document	112
Changing Printer Settings	112
Printing Multiple Pages on One Sheet of Paper	114
Scanning	114
Software section Index	115
A	115
C	115
D	115
E	115
F	115
G	115
H	115
I	115
L	115
M	115
N	115
O	115
P	115
R	115
S	115
T	116
U	116

Match case Limit results 1 per page

Copying

4.6

Changing the Default Settings

The copy options, including darkness, original type, copy size

and number of copies, can be set to the most frequently used

modes. When you copy a document, the default settings are

used unless they are changed by using the corresponding

buttons on the control panel.

To create your own default settings:

Press

on the control panel until “Copy Setup”

appears on the top line of the display.

The first menu item, “Default-Change”, appears on the

bottom line.

Press

Enter

to access the menu item. The first setup

option, “Darkness”, appears on the bottom line.

Press the scroll button (

) to scroll through the setup

options.

When the option you want to set appears, press

Enter

access the option.

Change the setting using the scroll button (

or ).

For the SCX-4521F, you can enter the value using the

number keypad.

Press

Enter

to save the selection.

Repeat steps 3 through 6, as needed.

To return to Standby mode, press

Stop/Clear

OTE

: While you are setting copy options, pressing

Stop/Clear

cancels the changed settings and restores their default status.

Setting the Time Out Option

You can set the time the machine waits before it restores the

default copy settings, if you do not start copying after changing

them on the control panel.

Press

on the control panel until “Copy Setup”

appears on the top line of the display.

Press the scroll button (

) to display “Timeout” on the

bottom line.

Press

Enter

to access the menu item.

Press the scroll button (

) until the status you want

appears on the display.

You can select from 15, 30, 60, and 180 (seconds).

Selecting “Off” means that the machine does not restore

the default settings until you press

Start

to begin copying,

Stop/Clear

to cancel.

Press

Enter

to make your selection.

To return to Standby mode, press

Stop/Clear

Setting the Favorite Copy Option

You can set

Favorite Copy

on the control panel works as a

special copy button. Assign one of the copy feature to

Favorite

Copy

for quick accessing.

Press

on the control panel until “Copy Setup”

appears on the top line of the display.

Press the scroll button (

) to display “Favorite Copy”

on the bottom line.

Press

Enter

to access the menu item.

Press the scroll button (

) until the feature you want

appears on the display.

You can select from Clone, Copy Collate, Auto fit, ID Card

Copy, 2 Up, 4 Up, and Poster. See “Using Special Copy

Features” on page 4.4 for details about each feature.

Press

Enter

to make your selection.

To use the special copy feature quickly, press

Favorite Copy

then you will see the assigned special copy feature on the

display. Press

Enter

to start copy job.