Samsung SL-M2625D User Manual Ver.1.01 (English) - Page 110
Command- line, Definition, Description, Standard TCP/IP
View all Samsung SL-M2625D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Installing driver over the network Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. Command- line Definition Description /s or Starts silent installation. Installs machine drivers /S without prompting any UIs or user intervention. /p"" or /P"" Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name. For example: • /p"xxx.xxx.xxx.xxx" in where, "xxx.xxx.xxx.xxx" means IP address for network printer. / p"USB001", /P"LPT1:", / p"hostname" Command- line Definition Description /a"" or /A"" Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software. /n"" or /N"" Specifies printer name. Printer instance shall be created as specified printer name. With this parameter, you can add printer instances as your wishes. /nd or /ND Commands not to set the installed driver as a default machine driver. It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won't be applied because Windows OS will set installed printer driver as a default machine driver. 2. Using a network-connected machine 110