Samsung SNB-5000 User Manual - Page 14
Reset Button, Power Port, Network Port, I/O Port, Video Out Port - default ip address
View all Samsung SNB-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
overview Reset Button Power Port GND Network Port I/O Port Video Out Port Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. J Resetting the camera requires reconfiguration of network settings (IP address, subnet mask, gateway address etc.) using the IP Installer software application. Used to plug the power cable. Used for earth-grounding. Used to connect a PoE or LAN cable. ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. ALARM COM Common port where the alarm output signal is connected. GND Used for earth-grounding. Video signal output port connected to the monitor. 14_ overview
overview
14_
overview
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Power Port
Used to plug the power cable.
GND
Used for earth-grounding.
Network Port
Used to connect a PoE or LAN cable.
I/O Port
ALARM IN
Used to connect the alarm input signal.
ALARM OUT
Used to connect the alarm output signal.
ALARM COM
Common port where the alarm output signal is connected.
GND
Used for earth-grounding.
Video Out Port
Video signal output port connected to the monitor.