Samsung SNB-5000 User Manual - Page 91
Troubleshooting
View all Samsung SNB-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
M APPENDIX TROUBLESHOOTING PROBLEM I can't access the camera from a web browser. Viewer got disconnected during monitoring. I cannot connect to the system using a tab browser of Internet Explorer 7.0. The camera connected to the network is not detected in the IP installer program. Images overlap. No image appears. SOLUTION y Check to make sure that the camera's Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem. y If connected using a DDNS URL, verify that the MAC address has been properly entered. y If the camera is connected to a router, verify that port forwarding is properly configured. y Connected Viewers become disconnected upon any change to camera or network configurations. y Check all network connections. y If the camera is connected over an PPPoE network, it' s possible for Viewer to disconnect under poor network conditions. y When you try to connect to the system using a tab browser, the same cookie information is shared, resulting in errors when connected. Therefore, instead of using a tab browser, open a new browser window to connect to the system. y Turn off the firewall settings on your PC and then search the camera again. y Check whether two or more cameras are set to a single multicast address instead of different addresses. If a single address is used for multiple cameras, the images may overlap. y If the transmission method is set to multicast, check whether there is a router that supports multicast in the LAN the camera is connected to. English _91