Sharp UP-3301 Instruction Manual - Page 37

■ PLU level shift (for direct PLUs) This shift can double or triple the number of direct PLUs on your POS terminal without adding additional direct PLU keys. You can use direct PLUs in ten levels by utilizing the PLU level shift keys L1 thru L10 . Level key shifts the PLU level from the other nine to the required level. (The normal level is the level 1.) You must program your machine in the PGM mode to select one of the two PLU level shift modes - automatic return mode* and lock shift mode** - and decide whether to allow PLU level shift in both the REG and MGR modes or in the MGR mode alone. * The automatic return mode automatically shifts the PLU level back to level 1 after touching a direct PLU key or finalizing each transaction. ** The lock shift mode holds the current PLU level until a PLU level shift key is touched. Automatic return mode (for PLU levels) If your terminal has been programmed for PLU level in the automatic return mode, touch a desired PLU level shift key before a numeric entry. Procedure (Returning every item entry) L2 L10 (Returning every transaction) L1 L10 Numeric entry (Q'ty, X/TIMES ) Direct PLU Numeric entry (Q'ty, X/TIMES ) Direct PLU (Finalization) Return to level 1 NOTE When you use the FF method, you need not touch the X/TIMES key on numeric entry. Lock shift mode (for PLU levels) If your terminal has been programmed for PLU level in the lock shift mode, touch a desired PLU level shift key before a numeric entry. Procedure L1 Numeric entry Direct PLU Stay in the current level L10 (Q'ty, X/TIMES ) NOTE • If you select the automatic return mode (Retuning every item entry), it is not necessary to use the L1 key on the keyboard. • When you use the FF method, you need not touch the X/TIMES key for multiplication entries. 35 www.cashregisters.net