Sharp UX-K02 UXCD600 Operation Manual - Page 127
Dialing and transmission problems
UPC - 074000033801
View all Sharp UX-K02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
10. Troubleshooting Problems and Solutions Dialing and transmission problems Problem Solution No dial tone when you • Make sure the handset cord is connected to the pick up the handset or correct jack. See Connecting the handset on page press the SPEAKER key. 16. Dialing is not possible. • Make sure the power cord is properly plugged into a power outlet. • Make sure that the telephone line is properly connected to correct jack on the machine and the wall jack (see page 17). • Make sure that the machine is set to the correct dialing mode for your telephone line. See page 35. The power is on, but no transmission takes place. • Make sure that the receiving machine has paper. • If the receiving machine is in manual mode with no attendant, reception will not be possible. • Check the display for error messages. • Pick up the handset and check for a dial tone. Nothing is printed at the receiving end. • Make sure that the document for transmission is placed face down in the feeder. A distorted image is • Noise on the telephone line may cause distortion. received at the other end. Try sending the document again. • Make a copy of the document on your machine. If the copy is also distorted, your machine may need service. 125