Sharp UX-K02 UXCD600 Operation Manual - Page 49

2. Cordless Handset Using Auto Attendant Mode Setting the ring duration In Auto Attendant mode, after the caller listens to your greeting and presses a key to call a particular person, the cordless handset of that person (or the machine handset) will make a special ringing sound (called pseudo ringing) for 15 seconds. If the call is not answered during this time, the answering system will activate and the OGM (greeting) recorded for the personal box corresponding to the cordless handset will play (if an OGM for the personal box has not been recorded, the general OGM will play). This allows the caller to leave a message. (See Chapter 3.) If desired, you can change the amount of time the cordless handset will ring before the answering system activates. Selections for the duration are 15 seconds (this is the initial setting), 30 seconds, 60 seconds, and 120 seconds. Use the operation panel of the machine to change the setting. 1 FUNCTION Press once and the machine. once on 2 Press once and 4 times. Machine display: OPTION SETTING PSEUDO RING 3 Press once. PSEUDO RING 1=15 SECONDS 4 Press a number from 1 to 4 to select the desired pseudo ring time. : 15 seconds : 30 seconds : 60 seconds : 120 seconds The display briefly shows FAX SIGNAL RX your selection, then: 5 Press STOP to return to the date and time display. 47