Sharp UX-K02 UXCD600 Operation Manual - Page 24
Reinforced concrete, Metal, Aluminum sash - phone charger
UPC - 074000033801
View all Sharp UX-K02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Up When the battery needs charging, LOW BATTERY will appear in the display and you will hear beeps during a phone conversation. If you need to continue the conversation, transfer the call to the machine or another cordless handset (see page 56). Place the cordless handset in the charger and let it charge. Note: If the battery is extremely low, nothing may appear in the display during the first several minutes that the cordless handset is in the charger. The battery will begin to charge normally after several minutes. To ensure that the battery charges properly, wipe the charger contacts once a month with a cotton swab. Important: Place the cordless handset away from the machine. If placed too close to the machine, the cordless handset may not ring correctly and phone calls may be cut off. Talking range The talking range of the cordless handset may decrease depending on transmission conditions. If you hear noise or interference while talking on the cordless handset, move closer to the machine. ♦ When outside the talking range, HANDSET? will appear in the display. If you move out of the talking range while talking on the cordless handset, your call will be disconnected. Move closer to the machine and then press TALK to restore communication with the machine ("HANDSET?" will be cleared and the normal standby display will appear). Large metal objects, metal structures, and thick walls reduce the talking range. Aluminum sash Metal Reinforced concrete 22