Sharp UX-K02 UXCD600 Operation Manual - Page 133
Messages and Signals
UPC - 074000033801
View all Sharp UX-K02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
10. Troubleshooting Messages and Signals Messages and Signals Display messages (machine) Note: If you have turned on the Caller ID function, see page 109 for display messages related to Caller ID. ADD PAPER & / PRESS START KEY (alternating messages) BUSY CALL TRANSFER CHECK FILM/ CHECK COVER/ CHECK PAPER JAM (alternating messages) CHECK PAPER SIZE CONFERENCE DOCUMENT JAMMED Check the printing paper. If the tray is empty, add paper and then press the START/MEMORY key. If there is paper in the tray, make sure it is inserted correctly (take out the stack, align the edges evenly, and then reinsert it in the tray) and then press the START/MEMORY key. The system is busy (phone/fax on line 2, intercom, and listening to messages from a cordless handset cannot take place simultaneously). Wait until the system is free. A call is being transferred. These alternating messages appear when there is a problem in the print compartment that prevents printing. Check to see if the imaging film is not loaded properly or if it has been used up and needs replacement. Make sure the operation panel is completely closed (press down on both sides). If a paper jam has occurred, clear the jam as explained in the following section, Clearing Paper Jams. The paper size setting is incorrect. Change the paper size setting as explained on page 29. A conference call is taking place (see page 56). The original document is jammed. See the following section, Clearing Paper Jams. Document jams will occur if you load more than 10 pages at once or load documents that are too thick (see page 82). The document may also jam if the receiving machine doesn't respond properly when you attempt to send a fax. 131