Sharp UX-K02 UXCD600 Operation Manual - Page 131

10. Troubleshooting Problems and Solutions You hear noise or interference during a call. • Make sure the base antenna is fully upright on the machine (see page 20). If the antenna is upright and you still hear noise, try moving the antenna forward or backward. • Other electrical appliances may cause interference. Move away from any electrical appliances, including notebook computers and access points that communicate on a wireless LAN. • Move closer to the machine. Note that large metal objects, metal structures, and thick walls between the machine and cordless handset will reduce the talking range. If needed, try moving the machine to a different location. You hear beeps during a call. • You will hear beeps during a call and LOW BATTERY will appear in the display if the battery is low. Place the cordless handset in the charger and let it recharge. If you hear beeps during a call and need to continue the call, press INTER COM to transfer the call to the machine. INTERCOM/ CONFERENCE When you press or INTER COM , the name of one of the other cordless handsets does not appear in the list (only the number appears), even though a name has been programmed for that cordless handset. • The name was not transmitted to your cordless handset when it was entered (probably because your cordless handset was in use). To retransmit the name, repeat the name entry procedure on page 23 (in Step 5, enter the number of the cordless handset whose name does not appear). 129