Sharp UX-K02 UXCD600 Operation Manual - Page 77

Transfer Function 3. Answering System 1 FUNCTION Press once and once. Display: T.A.D. SETTING 2 Press once and 3 times. TRANSFER FUNC 3 Press 4 Press once. TRANSFER FUNC 1=YES, 2=NO to turn on the Transfer function. (To turn off, press .) 5 Press the number of the box for which you want the Transfer function to operate (for the general box, press ). The display briefly shows your selection, then: ON TAD FAILURE 6 Press STOP to return to the date and time display. 7 Each time the answering system receives a message in the selected box, it will call your programmed transfer number. When you answer, you will hear your recorded message telling you that the call is a transfer call. On the dial pad of your phone, enter , your remote code number (see page 76) if the general box or a personal box without a passcode was selected in Step 5, or the box passcode number if a personal box with a passcode was selected, and then . Your messages will play. • You can also perform any of the remote operations described in Remote Operations later in this chapter (see page 76). Note: When you hang up after a transfer call, the machine will not immediately resume normal operation. If you want the machine to accept calls immediately after a transfer call, enter twice before hanging up (if hanging up during message playback, first enter and to stop playback, then enter twice). 75