Sharp UX-K02 UXCD600 Operation Manual - Page 38
Specifying how the line is selected dialing line setting
UPC - 074000033801
View all Sharp UX-K02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Line Settings Specifying how the line is selected (dialing line setting) If you have connected two lines to the machine, use this setting to specify how the line is selected when you make a phone call or send a fax by manual dialing. The settings are MANUAL and AUTO. When MANUAL is selected, you must manually select the line each time you make a phone call. When AUTO is selected, the machine will automatically select an open line. The machine is initially set to MANUAL. If you wish to change the setting to AUTO, follow the steps below. Note: The dialing line setting does not apply to faxes sent by automatic dialing (see page 88). When you send a fax by automatic dialing, the machine will normally use line 2. The machine will only use line 1 if line 2 is busy. 1 FUNCTION Press once and the machine. once on 2 Press once and twice. Display: OPTION SETTING DIALING LINE 3 Press once. 4 Press to select AUTO (the machine will automatically select the line), or to select MANUAL (you must select the line each time you dial). DIALING LINE 1=AUTO, 2=MANUAL The display briefly shows your selection, then: LINE 2 INVALID 5 Press STOP to return to the date and time display. 36