Sharp UX-K02 UXCD600 Operation Manual - Page 73
OGM only mode
UPC - 074000033801
View all Sharp UX-K02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3. Answering System Optional Answering System Settings ♦ Automatic fax reception NO: The machine will answer after 20 rings, after which it will wait to receive a remote command. Most callers will hang up before it answers; however, when you call the machine from a remote location, you can wait until it answers, listen to your messages, and then erase them (see Remote Operations on page 76). The initial setting is NO . If you want to change the setting to YES, press the panel keys as follows: 1 FUNCTION Press once and once. Display: T.A.D. SETTING 2 Press once and 4 times. 3 Press once. 4 Press to select YES (turn on automatic fax reception), or to select NO. ON TAD FAILURE ON TAD FAILURE 1=YES, 2=NO The display briefly shows your selection, then: OGM ONLY MODE 5 Press STOP to return to the date and time display. OGM only mode If needed, you can turn off recording of incoming messages. In this case, your outgoing message will play, but callers will not be able to leave a message (this applies to all boxes). The machine will receive faxes sent by auto dialing. (Note: If the machine initially answers a call in Auto Attendant mode and then switches to OGM only mode (TAD mode) because nobody answers the paged device, fax reception will not be possible.) 1 FUNCTION Press once and once. Display: T.A.D. SETTING 2 Press once and 3 times. OGM ONLY MODE 71