Singer One Instruction Manual 4 - Page 20
adjusting, machine, fabric
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
adjusting machine to your fabric Straight-Stitch Settings PatternSelector Dial Stitch-Panel Pointer N lv Pattern- Selector Release Lever StitchWidth Dial NeedlePosition Ring SETTING CONTROLS 1. Set pattern-selector release lever by turning it clockwise until it locks in place. If lever fails to lock, turn hand wheel slightly and reset lever. NOTE: Do not attempt to turn patternselector release lever after it is locked in place. It repositions itself when you start the machine or turn the hand wheel. 2. Turn pattern-selector dial until stitch-panel pointer is above I setting. 3. Turn stitch width dial to^ and turn needle position ring toA (center). 4. Attach straight-stitch foot and straightstitch plate (see pages 4 and 5). NOTE: When alternating between straight and zig-zag stitching use the zig-zag foot and zigzag plate, and set pattern selector on zig-zag setting I . N ecrease Increase R 4 M X. D A R N Pressure Dial REGULATING PRESSURE The pressure dial regulates the pressure that the presser foot exerts on the fabric. The NORM (normal) setting can be used for sewing a wide variety of fabrics of different weight and texture. Intermediate settings, above and below NORM, are also provided. Generally lighter than normal pressure is best for thick, soft fabrics. See page 45 for adjusting pressure when sewing knits. Lower the presser foot before setting pressure. • To increase pressure, turn dial from NORM toward MAX. • To decrease pressure, turn dial from NORM toward DARN. • For darning, set dial on DARN. 14