Singer One Instruction Manual 4 - Page 31
Singer One Manual
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Changing Discs CHANGING DISCS Raise 1. Open console cover. Disc 2. Turn pattern-selector release lever clock- Holder Disc wise until it locks in place. If lever fails to lock, turn hand wheel slightly toward you and reset lever. 3. Raise disc holder. (Disc will rise for easy removal.) Then remove disc from holder. 4. Place a new disc (desired pattern side up) on holder so that the three inside grooves fit properly on holder. 5. Press down on disc with fingers until it snaps into place. Press Disc Down 6. Set pattern selector on Q to activate disc. Finding the Beginning of a Pattern Unit When Using A Disc To start stitching one of the Fashion Stitch or Flexi-Stitch disc patterns at its beginning, align the start symbol V on the disc with the pattern-start symbol A, on the machine. To align both start symbols: • Unthread the needle. • Hold needle and bobbin thread ends. • Run the machine until both aligned. symbols are • Release the threads. • Thread the needle and start to sew. F Set Pattern Selector on © to Sew Patte Start Indicators Starting at Beginning of Pattern Unit 25