Singer One Instruction Manual 4 - Page 37
Chainstitch
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
SEWING A CHAINSTITCH SEAM • Stitch: Straight I A • Stitch Width:Q • Needle Position: • Stitch Length: 10 to 12 only • Take-up Lever: Thread Eyelet • Bobbin-case Insert • Straight-stitch Plate • Zig-Zag Foot 1. Draw thread under foot to back of machine, hold thread end and position needle in fabric. Lower foot. • Start machine and stitch to end of seam, ending with needle in fabric. Do not attempt to stitch in reverse or sew off the fabric edge. • Raise presser foot and turn hand wheel to raise take-up lever to its highest point. 2. Pass scissors under presser foot and draw out a loop of thread. 3. Hold loop and cut thread about an inch from end of stitching. 4. Remove fabric from machine by pulling it straight back, away from you. The thread end will pull through fabric to the underside and form a temporary lock. • Instructions for releasing the chain from the machine without forming a temporary lock in the fabric are given on the following page. 1 Sewing a Chainstitch Seam 2 Starting to Sew 3 )\, Cutting Thread Pulling OutiLoop of Thread 4 \ -7 Removing Fabric 31