Sony ICD-SX750 Operating Instructions - Page 40
Cutting out Low Frequency – the LCF Function, To cancel the pre-recording, function
UPC - 027242777729
View all Sony ICD-SX750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Notes If you start recording with pre-recording function using the built-in microphones, a click noise may be recorded when you press (record/pause). To record with prerecording function, we recommend using an external microphone. When the remaining recordable time is less than 10 seconds, the pre-recording function is disabled. When 60 minutes have passed after the IC recorder entered the standby mode, the standby mode will be cancelled and recording stops. If you stop recording before step 8, sounds buffered in the memory will not be saved. To cancel the pre-recording function Set "PRE REC" to "OFF" in step 4. Cutting out Low Frequency - the LCF Function /MENU When you set the LCF (Low Cut Filter) function to "ON" in the stop or recording mode, you cut out a frequency of lower than 200 Hz to reduce the roaring noise from wind, etc., this helps to record a sound source more clearly. The LCF function is set to "OFF" when you purchase the IC recorder. 40GB