Home » Sony Manuals » Voice Recorders » Sony ICD-SX750 » Manual Viewer

Sony ICD-SX750 Operating Instructions - Page 42

To cancel the VOR function, Press and hold, MENU to enter, the menu mode., Press, to select VOR

UPC - 027242777729

Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

The VOR function is set to "OFF" when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press  or  to select "VOR," then press . 3 Press  or  to select "ON," then press . 4 Press  (stop) to exit the menu mode. 5 Press  (record/pause). " " and " " appear in the display window. The recording starts when the IC recorder detects sound. The recording pauses when no sound is detected and " " and " " flash. When the IC recorder detects sound again, the recording starts again. To cancel the VOR function Set "VOR" to "OFF" in step 3.  Notes  The VOR function is affected by the sound around you. Set "REC LEVEL" in the menu according to the recording conditions. If recording is not satisfactory after you have changed the microphone sensitivity, or for an important recording, set "VOR" to "OFF" in the menu.  If you press  (record/pause) to pause recording during VOR recording, only " " flashes.  During synchronized recording (page 50), manual recording (page 34), and prerecording (page 38), the VOR function does not work. 42GB

Section	Page
Table of Contents	4
Checking the Contents of the Package	7
Index to Parts and Controls	8
Getting Started	14
Step 1: Preparing a Power Source	14
Inserting the alkaline batteries	14
Inserting the rechargeable batteries	14
Disconnecting the IC recorder from your computer	15
When replacing/charging the batteries	16
Step 2: Setting the Clock	19
Setting the clock after replacing/recharging batteries	19
Setting the clock using the menu	20
Step 3: Setting the Language to Be Used in the Display Window	21
Step 4: Preparations Required before Recording	23
Turning the IC Recorder On or Off	25
Turning the power off	26
Turning the power on	26
Recording	27
Recording Messages	27
Selecting the Recording Mode	30
Setting the Recording Level	33
Manual Recording Mode	34
Setting the Input Level Automatically to Prevent Sound Distortion – the Limiter Function	36
Recording a Few Seconds in Advance, before Starting to Record – the Pre-Recording Function	38
Cutting out Low Frequency – the LCF Function	40
Starting to Record Automatically in Response to Sound – the VOR Function	41
Dividing a Message into Two During Recording	43
Adding a Recording to a Previously Recorded Message	44
Adding an Overwrite Recording during Playback	46
Recording with an External Microphone	48
Recording sound from a telephone or a cell phone	49
Recording from Other Equipment	50
To record using the synchronized recording function	50
To record without using the synchronized recording function	52
Playback	54
Playing Back Messages	54
Selecting the Playback Mode	57
Playing back a specified section repeatedly – A-B Repeat	58
Adjusting the Playback Speed – the DPC Function	59
Reinforcing the Bass Sound	60
Reducing Distortion to Make the Human Voice Clearer – the Noise Cut Function	61
Adjusting the Playback Sound by Amplifying Inaudible Sound – the Digital Voice Up Function	63
Adding a Bookmark	64
Recording with Other Equipment	66
Playing Back a Message at a Desired Time with an Alarm	67
Editing Messages	71
Erasing Messages	71
Erasing messages one by one	71
Erasing all messages in a folder	72
Moving a Message to a Different Folder	73
Dividing a Message into Two	75
Adding Priority Mark(s) – the Priority Mark Function	77
Preventing Accidental Operation – the HOLD function	78
Utilizing the Menu Function	79
Making Settings for the Menu	79
Utilizing Your Computer	93
What You Can Do Using the Computer	93
System requirements for your computer	94
Connecting the IC recorder to your computer	95
Disconnecting the IC recorder from your computer	96
Copying Files from the IC Recorder to Your Computer	96
Copying Files from Your Computer to the IC Recorder and Playing Them Back	97
Construction of folders and files	99
Using the Supplied Digital Voice Editor Software	101
What You Can Do Using the Digital Voice Editor Software	101
System requirements	103
Installing the software	104
Referring to the help files	108
Transferring the files using the Digital Voice Editor software	108
Using the IC Recorder as a USB Mass Storage Device	109
Troubleshooting	110
Troubleshooting	110
IC recorder	110
Error messages	120
System limitations	123
Additional Information	125
Using a USB AC Adaptor (not supplied)	125
Disconnecting the IC recorder from the AC outlet	126
Precautions	127
Specifications	129

Match case Limit results 1 per page

³±

The

VOR

function

set

“OFF”

when

you

purchase

the

recorder.

Press and hold

/MENU to enter

the menu mode.

The

mode

window

will

displayed.

Press





to select “VOR,”

then press



Press





to select “ON,”

then press



Press



(stop) to exit the menu

mode.

Press



(record/pause).

“

”

and

“

”

appear

the

display

window.

The

recording

starts

when

the

recorder

detects

sound.

The

recording

pauses

when

sound

detected

and

“

”

and

“

”

ﬂash.

When

the

recorder

detects

sound

again,

the

recording

starts

again.

To cancel the VOR function

Set

“VOR”

“OFF”

step

Notes

The

VOR

function

affected

the

sound

around

you.

Set

“REC

LEVEL”

the

according

the

recording

conditions.

recording

not

satisfactory

after

you

have

changed

the

microphone

sensitivity,

for

important

recording,

set

“VOR”

“OFF”

the

menu.

you

press



(record/pause)

pause

recording

during

VOR

recording,

only

“

”

flashes.

During

synchronized

recording

(page

50),

manual

recording

(page

34),

and

pre-

recording

(page

38),

the

VOR

function

does

not

work.



