Sony ICD-SX750 Operating Instructions - Page 51
to select AUDIO, stop to exit the menu - audio recorder
UPC - 027242777729
View all Sony ICD-SX750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Recording 4 Press or to select "ON," then press . 5 Press (stop) to exit the menu mode. 6 Connect other equipment to the IC recorder when the IC recorder is in the stop mode. Connect the audio output connector (stereo mini-plug) of other equipment to the (microphone) jack of the IC recorder using an audio connecting cable*. "SELECT INPUT" appears in the display window. 7 Press or to select "AUDIO IN," then press . 8 Press (record/pause) to start recording. " " flashes and the IC recorder enters the recording pause mode. 9 Start playback on the component connected to the IC recorder. " " appears on the display and synchronized recording starts. The synchronized recording pauses when no sound is detected for more than 2 seconds, and " " flashes. The IC recorder starts recording again as a new message when sound is detected. Notes During synchronized recording, you cannot divide a recording message (page 43), you cannot pause recording (page 29), you cannot record with the VOR function or you cannot record with the pre-recording function. Depending on the equipment connected to the IC recorder, the synchronized recording function may not operate properly due to a difference in the audio input level. 51GB