Sony RDR GX257 Operating Instructions - Page 15
Step 4: Connecting the Mains Lead (Power Cord
UPC - 027242731318
View all Sony RDR GX257 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Hookups and Settings b Notes • Do not connect your TV's audio output jacks to the LINE 1 IN (AUDIO L/R) jacks at the same time. This will cause unwanted noise to come from your TV's speakers. • With connection B, do not connect the LINE 1 IN (AUDIO L/R) and LINE OUT jacks to your TV's audio output jacks at the same time. This will cause unwanted noise to come from your TV's speakers. • With connection A, after you have completed the connection, make the appropriate settings in the [Audio] setup (page 65). Otherwise, no sound or a loud noise will come from your speakers. • When you connect the recorder to an audio component using an HDMI cord, you will need to do one of the following: - Connect the audio component to the TV with the HDMI cord, or - Connect the recorder to the TV with a component video cord. *1 Step 4: Connecting the Mains Lead (Power Cord) Connect the supplied mains lead (the power cord) to the AC IN terminal of the recorder. Then plug the recorder and TV mains leads (AC power cords) into the AC outlet. After you connect the mains lead (the power cord), you must wait for a short while before operating the recorder. You can operate the recorder once the front panel display lights up and the recorder enters standby mode. If you connect additional equipment to this recorder (page 21), be sure to connect the mains lead (the power cord) after all connections are complete. ~AC IN *2 1 to AC IN 2 to AC outlet 15