Sony VPLHS3 Operating Instructions - Page 16

Connections and Preparations 5 Adjust the focus using the FOCUS ring, and adjust the picture size using the ZOOM ring. until the adjuster clicks into the round hole in the lower side at the rear of the projector with a click. Round hole ZOOM ring FOCUS ring 6 Adjust the position of the picture to fit the screen using the adjuster. Adjusting the picture position using the adjuster Hold down and slide the adjuster lock lever to the right, move the projector, then return the lock lever. Adjuster lock lever You can move the projector horizontally or vertically within the following ranges: Adjusting the picture position using the supplied adjuster spacer Attaching one of the supplied spacers for adjuster adjustment (spacers for 1º and 2°) allows you to tilt the projector to the right or left at a tilting angle up to 2º. Adjuster spacer (supplied) Adjuster spacer (supplied) To attach the supplied adjuster spacer 1 Place a thick cloth (e.g., a cushion) beneath the projector. Place the projector face down. 2 While pressing the lock knobs inward, remove the adjuster bar at the bottom of the adjuster table to which you want to attach the supplied spacer. Up to 30° each way horizontally Up to 10° each way vertically To reset the projector to the center position of the adjuster Hold down and slide the adjuster lock lever to the right, move the projector, then return the lock lever 3 Fit the spacer into the removed adjuster bar spot. 16 GB Step 3: Adjusting the Picture Size and Position