Sony VPLHS3 Operating Instructions - Page 39
Specifications, System, Input, General - hd
UPC - 027242628793
View all Sony VPLHS3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Specifications System Projection system 3 LCD panels, 1 lens, projection system LCD panel 0.62-inch TFT LCD panel, 1,245,816 pixels (415,272 pixels × 3) Lens 1.2 times zoom lens (manual) f15.7-20mm/F.2.0-2.3 Lamp 150 W UHP type Projection picture size Range: 40 to 150 inches (measured diagonally) Color system NTSC3.58/PAL/SECAM/NTSC4.43/ PAL-M/PAL-N system, switched automatically/manually Acceptable video signals 15 kHz RGB/component 50/60 Hz, Progressive component 50/60 Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/ 60i, 1080/50i), 1080/24PsF, Composite video, Y/C video Acceptable computer signals fH: 19 to 72 kHz fV: 48 to 92 Hz Maximum resolution XGA 1024 × 768, fV: 85 Hz 1280 × 720, fV:60 Hz Speaker Monaural speaker system, 33 mm (1 5/16 inches) diameter, max. 2 W × 1 Input Video input VIDEO: phono type Composite video: 1 Vp-p±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C, mini DIN 4-pin type (male) Y (luminance): 1 Vp-p±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated) burst 0.3 Vp-p±2 dB (PAL) (75 ohms terminated) Audio input AUDIO: stereo phono type 500 mVrms, impedance more than 47 kilohms HDMI Video: Digital RGB/YCB (PB) CR (PR) Audio: Digital PJ MULTI INPUT 32-pin multi connector Composite video: 1 Vp-p±2 dB sync negative (75 ohms terminated) S video: Y/C Y (luminance): 1 Vp-p±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p±2 dB (NTSC) (75 ohms terminated) burst 0.3 Vp-p±2 dB (PAL) (75 ohms terminated) Analog RGB/component: R/CR (PR): 0.7 Vp-p±2 dB (75 ohms terminated) G: 0.7 Vp-p±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p±2 dB sync negative (75 ohms terminated) B/CB (PB): 0.7 Vp-p±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/ negative Horizontal sync input: 1-5 Vp-p high impedance, positive/negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative General Dimensions 304 × 168 × 321 mm (12 × 6 5/8 × 12 3/4 inches) (w/h/d) Mass Approx. 4.5 kg (9 lb 15 oz) Power requirements AC 100 to 240 V, 2.1-1.1 A, 50/60 Hz Power consumption Max. 200 W (Standby mode: 3 W) Operating temperature 0ºC to 35ºC (32ºF to 95ºF) Operating humidity 35% to 85% (no condensation) Storage temperature -20ºC to 60ºC (-4ºF to 140ºF) Storage humidity 10% to 90% Supplied accessories Remote control RM-PJHS2 (1) Size AA (R6) batteries (2) Signal interface cable SIC-HS40 (5 m) (1) Adjuster spacers (2) AC power cord (1) Air filter (for replacement) (1) Operating Instructions (1) Design and specifications are subject to change without notice. Others 39 Specifications GB