Sony VPLHS3 Operating Instructions - Page 35

Sound No sound. c Check that connecting cables are properly connected. (1 page 9) c Adjust "Volume" in the PICTURE SETTING menu (1 page 29), or press VOLUME + on the remote control. c Press MUTING on the remote control. On-screen display On-screen display does c Set "Status" in the MENU not appear. SETTING menu to "On." (1 page 31) Remote control The remote control does not work. c Batteries could be weak. Replace with new batteries. (1 page 5) c Insert the batteries with correct polarities. (1 page 5) Indicators The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with your projector. LAMP/COVER Indicator TEMP/FAN Indicator LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY LAMP/COVER flashes. LAMP/COVER lights up. TEMP/FAN flashes. TEMP/FAN lights up. c Attach the lamp cover or the air filter cover securely. (1 pages 36 and 38) c The lamp has reached the end of its life. Replace the lamp. (1 page 36) c The lamp becomes a high temperature. Wait for one minute to cool down the lamp and turn on the power again. (1 page 24) c The fan is broken. Consult with qualified Sony personnel. c The internal temperature is unusually high. Check to see if nothing is blocking the ventilation holes. c Check to see whether or not the projector is being used at high altitudes. LAMP/COVER c The electrical system breaks down. and TEMP/FAN Consult with qualified Sony light up. personnel. Warning Messages Use the list below to check the meaning of the messages displayed on the screen. High temp.! Lamp off in 1 min. c Turn off the power. c Check to see if nothing is blocking the ventilation holes. Frequency is out of range! c Input a signal that is within the acceptable range of the frequency. c Set the output signal on an external monitor of the connected computer to SVGA. c Set "Input-A Signal Sel." in the SET SETTING menu to "Computer." Please check Input-A Signal Sel. c Set "Input-A Signal Sel." in the SET SETTING menu to "Computer" when RGB signal is input from the computer. (1 page 31) Please replace c It is time to replace the lamp. Replace the LAMP. the lamp. (1 page 36) Please replace c It is time to replace the air filter. Replace the filter. the air filter. (1 page 38) Iris unit doesn't c The iris is damaged. work. c Consult with qualified Sony personnel. Caution Messages Use the list below to check the meaning of the messages displayed on the screen. c No signal is input in the selected input. Check connections. Not applicable! c Press the appropriate button. Others 35 Troubleshooting GB