Sony pcm m10 Operating Instructions - Page 48
Recommended audio connecting, cable not supplied, Set the REC LEVEL switch to AUTO - microphone
UPC - 027242777828
View all Sony pcm m10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
connected, the built-in microphones become disabled. 1 Connect an external equipment to the PCM recorder in the stop mode. Connect the audio output jacks (stereo minijack) of external equipment to the LINE IN jack of the PCM recorder using a Sony audio connecting cable (not supplied). 2 Set the REC LEVEL switch to "AUTO" for automatic recording, or "MANUAL" for manual recording. 3 Press z REC. The PCM recorder enters the recording standby mode. 4 Start playback with the connected external equipment. 5 To start recording, press X PAUSE or N PLAY/ENTER. 6 When "MANUAL" has been selected in step 2, adjust the recording level with the REC LEVEL dial. 7 To stop recording, press x STOP. z Recommended audio connecting cable (not supplied) We recommend you use Sony RK-G129 audio connecting cable (not supplied). P Note When both m (microphone) jack and LINE IN jack are connected with an external microphone and an external device respectively, the input from the m (microphone) jack has the priority. When using the input from the LINE IN jack, remove an external microphone from the m (microphone) jack. 48 GB