Xerox 6180N Generic MICR Fundamentals Guide - Page 55
The height of the On-Us symbol is 0.091inch/2.3 mm, and
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Document design E13B character design All of the E13B characters are designed on a 7 by 9 matrix of 0.013 inch/0.33 mm squares (see figure 4-5.). The minimum character width is four squares (or 0.052 inch/1.3 mm) for the numbers 1 and 2. The maximum width is 0.091 inch/2.3 mm for the number 8, 0, and four special symbols. All characters except the On-Us and Dash symbols have a height of 0.117 inch/3 mm. This does not correspond to an exact point size usually specified for fonts, but is between 8 and 9 points. The height of the On-Us symbol is 0.091inch/2.3 mm, and the dash is 0.052 inch/1.3 mm. Both heights are multiples of the basic 0.013 inch/0.33 mm unit. 0.091 in. 0.078 in. 0.065 in. 0.052 in. For characters 0, 8, and symbols For characters 4, 6, 9 For characters 3, 5, 7 For characters 1, 2 0.117 in. This is a 7 by 9 matrix of 0.013 inch/0.33 mm squares Note: 1. All characters are centered around a horizontal center line. 2. All characters are right aligned. 3. Minimum height of right edges is 0.052 inch/1.3 mm. Figure 4-3. E13B character matrix design Field formats-E13B font The MICR line contains up to 65 character positions. These positions are numbered and grouped into five fields, which are read from right to left. Generic MICR Fundamentals Guide 4-9