Xerox 6180N Generic MICR Fundamentals Guide - Page 98
Bring the suspected character into the character box
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Quality control Figure 6-9. Character spacing If it is possible to move the check so that all characters are within a character box, place the right edges of as many characters as possible at the right edges of their character boxes. Look at the entire line and notice any characters whose right edges are not touching the right edges of their boxes. These characters are more or less than 0.125 inch/3.175 mm from their next closest character. To find out how much more or less the spacing is for a character, follow these steps: 1. Bring the suspected character into the character box containing the spacing tolerance zone, as shown in the previous figure. 2. Line up the right edge of an adjacent character with the right edge of an adjacent box. 6-12 Generic MICR Fundamentals Guide