Yamaha PSR-S900 Owner's Manual - Page 102
Vibrato, Effect/eq, Reverb Depth/chorus Depth/dsp Depth, Harmony, Depth, Speed, Delay, Reverb Depth
View all Yamaha PSR-S900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Voice Creating-Voice Set Vibrato: A quavering, vibrating sound effect that is produced by regularly modulating the pitch of the Voice. ● VIBRATO Pitch SPEED DELAY DEPTH Time DEPTH SPEED DELAY Determines the intensity of the Vibrato effect. Higher settings result in a more pronounced Vibrato. Determines the speed of the Vibrato effect. Determines the amount of time that elapses between the playing of a key and the start of the Vibrato effect. Higher settings increase the delay of the Vibrato onset. EFFECT/EQ 1. REVERB DEPTH/CHORUS DEPTH/DSP DEPTH REVERB DEPTH Adjusts the reverb (page 95) depth. CHORUS DEPTH Adjusts the chorus (page 95) depth. DSP DEPTH Adjusts the DSP (page 95) depth. If you want to re-select the DSP type, you can do so in the DSP menu explained below. DSP ON/OFF Determines whether the DSP is on or off. This setting can also be made from the VOICE CONTROL "DSP" button on the panel (page 53). PANEL SUSTAIN Determines the sustain level applied to the edited voice when the VOICE CONTROL [SUSTAIN] button on the panel is turned on (page 53). Using, Creating and Editing Voices 2. DSP DSP TYPE VARIATION Selects the DSP effect category and type. Select a type after selecting a category. Two variations are provided for each DSP type. Here, you can edit the VARIATION on/off status and variationparameter value setting. ON/OFF The factory-programmed assignments are set to variation-off for all Voices (standard variation of DSP is assigned). If you select VARIATION ON here, a variation of the DSP effect is assigned to the Voice. The variation parameter value can be adjusted in the VALUE menu explained below. This setting can also be made from the VOICE CONTROL "DSP VARI." button on the panel (page 53). This button is effective only when the [DSP] button is on. PARAMETER Displays the variation parameter. VALUE Adjusts the value of the DSP variation parameter. 3. EQ EQ LOW/HIGH These determine the Frequency and Gain of the Low and High EQ bands. HARMONY Harmony sets the Right 1 and 2 parts together. Press the PART SELECT [RIGHT 1] button before you set it. This has the same settings as the display of "Selecting the Harmony/Echo type" on page 89 in step 2. 102 PSR-S900/S700 Owner's Manual