Yamaha PSR-S900 Owner's Manual - Page 96

Editing the Volume and Tonal Balance (MIXING CONSOLE) 7 Use the [5π†]/[6π†] buttons to select the effect CATEGORY. 8 Use the [7π†]/[8π†] buttons to select the effect TYPE. If you want to edit the effect parameters, go on to the next operation. ■ Editing and Saving the effect 9 Press the [F] (PARAMETER) button to call up the display for editing the effect parameters. Using, Creating and Editing Voices Re-selecting the Effect block, category and type Use the [1π†]-[3π†] buttons. The re-selected effect configuration is displayed at the upper left side box in the display. 10 If you have selected one of the DSP 2-4 effect blocks in step 5: You can edit its standard parameters as well as its variation parameter. To select the standard type of parameters, press the [B] button. To select its variation parameter, press the [E] button. 10 13 10 11 12 Effect Return Level: Determines the level or amount of effect applied. This is set for all parts or channels. 11 Select one of the parameters you want to edit by using the [4π†]/ [5π†] buttons. Available parameters differ depending on the selected Effect type. 12 Adjust the value for the selected parameter by using the [6π†]/ [7π†] buttons. If you have selected the REVERB, CHORUS or DSP1 effect block in step 5: Adjust the Effect Return Level by pressing [8π†] button. 13 Press the [I] (SAVE) button to call up the display for saving your origi- nal effect. 96 PSR-S900/S700 Owner's Manual