Yamaha PSR-S900 Owner's Manual - Page 27

Operation of the File Selection Display In the File Selection display, you can select the Voice (page 30)/Song (page 36)/Style (page 46), etc. In the example here, we'll call up and use the Song Selection display. 2 Quick Guide 1 3, 5 3, 5 4 1 Press the SONG [SELECT] button to call up the Song Selection display. 2 Press the TAB [√][®] buttons to select the desired drive (PRESET/USER/USB). About PRESET/USER/USB PRESET Internal memory to which the preprogrammed data are installed as preset data. USER Internal memory that allows both reading and writing of data. USB USB storage device, such as USB flash memory/floppy disk drive, etc., which is connected to the [USB TO DEVICE] terminal. n Hereafter in this manual, any USB storage device such as USB flash memory/floppy disk drive, etc. will be referred to as "USB storage device." 3 Select a folder (if necessary). Several Songs may be together in a folder. In this case, the folder(s) will appear in the display (see the illustration at right). Press one of the [A]-[J] buttons to select a folder. Press the [8π] (UP) button to call up the next highest level folder. 4 Select a page (if the display has several pages). When the drive contains more than ten Songs, the display is divided up into several pages. The page indications are shown at the bottom of the display. Press one of the [1π]-[7π] buttons to select a page. n The number of pages shown varies depending on the selection display of the Voices/Songs/Styles. Press the button corresponding to "P1, P2 ..." in the display. 5 Press one of the [A]-[J] buttons to select a Song. You can also select a Song by using the DATA ENTRY dial, then press the [ENTER] button to execute. 6 Press the [EXIT] button to return to the previous display. PSR-S900/S700 Owner's Manual 27