Yamaha PSR-S900 Owner's Manual - Page 195

Assigning Specific Functions to Each Foot Pedal Using the Footswitch or Foot Controller ([AUX PEDAL] jack) The functions assigned by default to the connected footswitch or foot controller can be changed-for example, letting you use the footswitch to start/stop Style playback, or use the foot controller to produce pitch bends. 1 Call up the operation display. [FUNCTION] → [D] CONTROLLER → TAB [√][®] FOOT PEDAL 2 Use the [A]/[B] buttons to select one of the two foot pedals to which the function is to be assigned. 3 Use the [1π†] button to select the functions to be assigned to the pedal specified in step 2. Details on the pedal functions are listed below. 4 Use the [2π†]-[8π†] buttons to set the details of the selected functions. The available parameters differ depending on the function selected in step 3. Details on the parameters are given on page 196. 5 Check that the desired function is controllable with the pedal by actually pressing the pedal. n When you use the pedals to switch Registration Memory settings (page 138), these settings are invalid. Set the polarity of the pedal Pedal on/off operation may differ depending on the particular pedal you've connected to the instrument. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the control. Press the [I] (PEDAL POLARITY) button to switch the polarity. Using Your Instrument with Other Devices PSR-S900/S700 Owner's Manual 195