ZyXEL P-660HNU-F1 User Guide - Page 135
Table 27, LABEL, DESCRIPTION, Home Networking, ADSL Series User's Guide
View all ZyXEL P-660HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Figure 45 Network Setting > Home Networking > LAN Setup Chapter 7 Home Networking The following table describes the fields on this screen. Table 27 Network Setting > Home Networking > LAN Setup LABEL LAN IP Setup IP Address IP Subnet Mask DHCP Server State DHCP DESCRIPTION Enter the LAN IP address you want to assign to your ZyXEL Device in dotted decimal notation, for example, 192.168.1.1 (factory default). Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your ZyXEL Device automatically computes the subnet mask based on the IP address you enter, so do not change this field unless you are instructed to do so. Select Enable to have your ZyXEL Device assign IP addresses, an IP default gateway and DNS servers to LAN computers and other devices that are DHCP clients. If you select Disable, you need to manually configure the IP addresses of the computers and other devices on your LAN. IP Addressing Values IP Pool Starting Address Pool Size DNS Values When DHCP is used, the following fields need to be set. This field specifies the first of the contiguous addresses in the IP address pool. This field specifies the size, or count of the IP address pool. ADSL Series User's Guide 135