ZyXEL P-660HNU-F1 User Guide - Page 260

Wall-mounting Instructions, Be careful to avoid damaging pipes or cables located inside the wall

Page 260 highlights

Chapter 27 Product Specifications Table 90 Standards Supported (continued) STANDARD DESCRIPTION IEEE 802.11 Also known by the brand Wi-Fi, denotes a set of Wireless LAN/WLAN standards developed by working group 11 of the IEEE LAN/MAN Standards Committee (IEEE 802) IEEE 802.11b Uses the 2.4 gigahertz (GHz) band IEEE 802.11g Uses the 2.4 gigahertz (GHz) band IEEE 802.11n Uses the 2.4 gigahertz (GHz) band IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges 802.1x Port Based Network Access Control IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service ANSI T1.413, Issue 2 Asymmetric Digital Subscriber Line (ADSL) standard G dmt(G.992.1) G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceivers ITU G.992.1 (G.DMT) ITU standard for ADSL using discrete multitone modulation ITU G.992.2 (G. Lite) ITU standard for ADSL using discrete multitone modulation ITU G.992.3 (G.dmt.bis) ITU standard (also referred to as ADSL2) that extends the capability of basic ADSL in data rates ITU G.992.4 (G.lite.bis) ITU standard (also referred to as ADSL2) that extends the capability of basic ADSL in data rates ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the capability of basic ADSL by doubling the number of downstream bits RFC 2383 ST2+ over ATM Protocol Specification - UNI 3.1 Version TR-069 TR-069 DSL Forum Standard for CPE Wan Management TR-064 DSL Forum LAN-Side DSL CPE Configuration 1.363.5 Compliant AAL5 SAR (Segmentation And Re-assembly) Wall-mounting Instructions Do the following to hang your ZyXEL Device on a wall. Note: See Table 87 on page 256 for the size of screws to use and how far apart to place them. 1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL Device with the connection cables. 260 ADSL Series User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366

Chapter 27 Product Specifications
ADSL Series User’s Guide
260
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
Note: See
Table 87 on page 256
for the size of screws to use and how far apart to place
them.
1
Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2
Drill two holes for the screws. Make sure the distance between the centers of the holes matches
what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
3
Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the
heads of the screws and the wall.
4
Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL
Device with the connection cables.
IEEE 802.11
Also known by the brand Wi-Fi, denotes a set of Wireless LAN/WLAN
standards developed by working group 11 of the IEEE LAN/MAN
Standards Committee (IEEE 802)
IEEE 802.11b
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11g
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11n
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11d
Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
802.1x
Port Based Network Access Control
IEEE 802.11e QoS
IEEE 802.11 e Wireless LAN for Quality of Service
ANSI T1.413, Issue 2
Asymmetric Digital Subscriber Line (ADSL) standard
G dmt(G.992.1)
G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceivers
ITU G.992.1 (G.DMT)
ITU standard for ADSL using discrete multitone modulation
ITU G.992.2 (G. Lite)
ITU standard for ADSL using discrete multitone modulation
ITU G.992.3 (G.dmt.bis)
ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates
ITU G.992.4 (G.lite.bis)
ITU standard (also referred to as ADSL2) that extends the capability of
basic ADSL in data rates
ITU G.992.5 (ADSL2+)
ITU standard (also referred to as ADSL2+) that extends the capability of
basic ADSL by doubling the number of downstream bits
RFC 2383
ST2+ over ATM Protocol Specification - UNI 3.1 Version
TR-069
TR-069 DSL Forum Standard for CPE Wan Management
TR-064
DSL Forum LAN-Side DSL CPE Configuration
1.363.5
Compliant AAL5 SAR (Segmentation And Re-assembly)
Table 90
Standards Supported
(continued)
STANDARD
DESCRIPTION