ZyXEL P-660HNU-F1 User Guide - Page 207
Table 63, LABEL, DESCRIPTION, VPN, ADSL Series User's Guide
View all ZyXEL P-660HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Figure 107 Security > VPN > Setup > Edit Chapter 16 VPN The following table describes the fields in this screen. Table 63 Security > VPN > Setup > Edit LABEL DESCRIPTION IPSec Setup Active Select this check box to activate this VPN policy. This option determines whether a VPN rule is applied before a packet leaves the firewall. NAT Traversal Select this check box if you want to set up a VPN tunnel when there are NAT routers between the ZyXEL Device and remote IPSec router. The remote IPSec router must also enable NAT traversal, and the NAT routers have to forward UDP port 4500 packets to the remote IPSec router behind the NAT router. Tunnel Name Type up to 32 characters to identify this VPN policy. You may use any character, including spaces, but the ZyXEL Device drops trailing spaces. Mode Select net-net or Roadwarrior from the drop-down list box. Multiple SAs connecting through a secure gateway must have the same negotiation mode. ADSL Series User's Guide 207