ZyXEL P-660HNU-F1 User Guide - Page 89
Add/Edit Internet Connection
View all ZyXEL P-660HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 5 Broadband The following table describes the fields in this screen. Table 10 Network Setting > Broadband LABEL Add new WAN Interface Internet Setup # Name Type Mode Encapsulation VPI VCI Vlan8021p VlanMuxId ATM QoS IGMP Proxy NAT Default Gateway Modify DESCRIPTION Click this to create a new WAN interface. This is the index number of the connection. This is the service name of the connection. This shows the type of interface used by this connection. This shows whether the connection is in routing mode or bridge mode. This shows the method of encapsulation used by this connection. This is the Virtual Path Identifier (VPI). This is the Virtual Channel Identifier (VCI). This indicates the 802.1P priority level assigned to traffic sent through this connection. This displays N/A when there is no priority level assigned. This indicates the VLAN ID number assigned to traffic sent through this connection. This displays N/A when there is no VLAN ID number assigned. This shows the ATM Quality of Service (QoS) type configured for this connection. This displays N/A when there is no ATM QoS assigned. This shows whether IGMP (Internet Group Multicast Protocol) is activated or not for this connection. This shows whether NAT is activated or not for this connection. NAT is not available when the connection uses the bridging service. This shows whether the ZyXEL Device uses the interface of this connection as the system default gateway. Click the Edit icon to configure the connection. Click the Delete icon to delete this connection from the ZyXEL Device. A window displays asking you to confirm that you want to delete the connection. 5.2.1 Add/Edit Internet Connection Use this screen to configure a WAN connection. The screen varies depending on the encapsulation method used and WAN service type you select. 5.2.1.1 Routing- PPPoE Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the connection you want to configure. Select Routing as the encapsulation mode and PPPoE as the WAN service type. ADSL Series User's Guide 89