2014 Chevrolet Impala Owner Manual - Page 162

5-48 Instruments and Controls and the garage door does not move, continue with programming Steps 4-6. and then release it. If the garage door does not move or the lamp on the garage door opener receiver does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it. The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. 3. Press and hold the newly programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation. . If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4-6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light . Learn or Smart Button 4. After completing Steps 1-3 , locate the Learn or Smart button inside garage on the garage door opener receiver. The name and color of the button may vary by manufacturer. 5. Press and release the Learn or Smart button. Step 6 must be completed within 30 seconds of pressing this button. 6. Inside the vehicle the vehicle, press and hold the newly programmed Universal Remote system button for two seconds Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit .