2014 Chevrolet Impala Owner Manual - Page 42

2-8 Keys, Doors, and Windows To start the vehicle: 6. Remove the transmitter from the transmitter pocket and press K. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode. Battery Replacement Replace the battery if the DIC indicates that battery replacement is necessary. See Key and Lock Messages on page 5-34. { Caution When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. 1. Open the center console and place the transmitter in the transmitter pocket with the buttons facing the front of the vehicle. 2. With the vehicle in P (Park) or N (Neutral), press the brake pedal and press the ENGINE START/STOP button. See Starting the Engine on page 9-19. Replace the transmitter battery as soon as possible. The battery is not rechargeable. To replace the battery: 1. Press the button on the transmitter to extend the key blade. Starting the Vehicle with a Low Transmitter Battery or Wireless Interference If the transmitter battery is weak or there is wireless interference, the DIC may display NO REMOTE DETECTED or PLACE TRANSMITTER IN POCKET TO START when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time.