2014 Chevrolet Impala Owner Manual - Page 31
2014 Chevrolet Impala Manual
Page 31 highlights
In Brief mode. Remember to shift to P (Park) and turn the ignition to LOCK/OFF before exiting the vehicle. See Starting the Engine on page 9-19. Vehicles with eAssist also have a high voltage battery. Only a trained service technician with the proper knowledge and tools should inspect, test, or replace the high voltage battery. See your dealer if the high voltage battery needs service. See Battery on page 10-27. 1-25 Performance and Maintenance Traction Control/ Electronic Stability Control The Traction Control System (TCS) limits wheel spin. The system turns on automatically every time the vehicle is started. The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system also turns on automatically every time the vehicle is started. . Regenerative Braking Regenerative braking takes some of the energy from the moving vehicle and turns it into electrical energy. This energy is then stored in the vehicle's high voltage battery system, contributing to increased fuel efficiency. The system works whenever the accelerator pedal is released, and increases the energy captured as more brake pedal is applied. Service Never try to do your own service on eAssist components. You can be injured and the vehicle can be damaged if you try to do your own service work. Service and repair of these high voltage components should only be performed by a trained service technician with the proper knowledge and tools. See Doing Your Own Service Work on page 10-3. Battery This vehicle has a standard 12-volt battery. Refer to the replacement number on the original battery label when a new standard 12-volt battery is needed. To turn off traction control, press and release the g button on the center console. The Traction Off Light i illuminates. To turn off both traction control and StabiliTrak, press and hold the g button, until the Traction Off Light i and the StabiliTrak Off Light g illuminate. .