2014 Chevrolet Impala Owner Manual - Page 244

9-36 Driving and Operating happens, the cruise control will automatically disengage. See Traction Control/Electronic Stability Control on page 9-33. If a collision alert occurs when cruise control is activated, cruise control is disengaged. See Forward Collision Alert (FCA) System on page 9-48. When road conditions allow you to safely use it again, the cruise control can be turned back on. If the brakes are applied, the cruise control disengages. 5 (On/Off): Press to turn cruise control on or off. A white indicator comes on in the instrument cluster. +RES (Resume/Accelerate): Press briefly to make the vehicle resume to a previously set speed, or press and hold to accelerate. If cruise control is already active, use to increase vehicle speed. SET-: Press briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease vehicle speed. If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. 1. Press the 5 button to turn the cruise system on. 2. Get up to the desired speed. 3. Press and release the SET- button on the steering wheel. 4. Remove foot from the accelerator. Resuming a Set Speed If cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed is 40 km/h (25 mph) or greater, press the +RES button on the steering wheel. The vehicle returns to the previous set speed. * (Cancel): Press to disengage cruise control without erasing the selected set speed. Setting Cruise Control The cruise control indicator on the instrument cluster turns green after the cruise control has been set to the desired speed. See Instrument Cluster on page 5-9.