2014 Chevrolet Impala Owner Manual - Page 294
2014 Chevrolet Impala Manual
Page 294 highlights
10-20 Vehicle Care This mixture: . What to Use { Warning Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will. The coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/ 50 mixture of clean, drinkable water and DEX-COOL coolant. Use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant. If using this mixture, nothing else needs to be added. Gives freezing protection down to −37°C (−34°F), outside temperature. Gives boiling protection up to 129°C (265°F), engine temperature. Protects against rust and corrosion. Will not damage aluminum parts. Help keep the proper engine temperature. Caution (Continued) proper mixture of engine coolant for the cooling system. See Recommended Fluids and Lubricants on page 11-12. Never dispose of engine coolant by putting it in the trash, pouring it on the ground, or into sewers, streams, or bodies of water. Have the coolant changed by an authorized service center, familiar with legal requirements regarding used coolant disposal. This will help protect the environment and your health. . . . . { Caution If improper coolant mixture, inhibitors, or additives are used in the vehicle cooling system, the engine could overheat and be damaged. Too much water in the mixture can freeze and crack engine cooling parts. The repairs would not be covered by the vehicle warranty. Use only the (Continued) Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down.