2014 Chevrolet Impala Owner Manual - Page 307

Vehicle Care 3. Remove the bulb from the socket. 4. Replace the bulb in the bulb socket. 5. Install the bulb socket in the headlamp assembly by turning it clockwise. 6. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer. 10-33 Stoplamp/Taillamp/Turn Signal Lamp and Back-Up Lamp 3. Remove the bulb socket by turning counterclockwise and pulling straight out. 4. Remove the bulb from the socket by pulling it straight out. 5. Install the new bulb in the bulb socket. 6. Install the bulb socket by turning clockwise. 7. Install the trunk deck trim. Driver Side Shown, Passenger Side Similar 1. Back-Up Lamp 2. Stoplamp/Taillamp/Turn Signal Lamp Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps Trunk Deck Inboard Taillamp 1. Open the trunk. See Trunk on page 2-14. 2. Remove the push pins and pull back the trunk deck trim.