2014 Chevrolet Impala Owner Manual - Page 339

Vehicle Care 10-65 Tire Changing Removing the Spare Tire and Tools 2. Remove the spare tire cover. tools from under it. Then remove the spare tire on an angle to clear the mounting stud and battery. Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10-63. 2. Turn the wheel wrench counterclockwise to loosen and remove the wheel nut caps. 3. Turn the retainer nut counterclockwise and remove the spare tire. Place the spare tire next to the tire being changed. 4. The jack and tools are stored below the spare tire. Remove them from their container and place them near the tire being changed. To make removal easier for eAssist models, tilt the spare tire up and remove the jack and Do not try to remove plastic caps from the cover or center cap. 3. Pull the cover or center cap away from the wheel. Store the wheel cover in the cargo area until you have the flat tire repaired or replaced. 1. Screwdriver 2. Tow Hook (If Equipped) 3. Jack 4. Wrench (In Bag) 5. Trim Removal (If Equipped) 6. Fastener (If Equipped) To access the spare tire and tools: 1. Open the trunk.