2014 Chevrolet Impala Owner Manual - Page 66

3-8 Seats and Restraints Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park), press and release "1," "2," or B to manually recall the previously stored memory positions. Placing the ignition in OFF before the stored positions are reached stops the recall. If something has blocked the driver seat and/or power tilt and telescoping steering column (if equipped) while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. Automatically Recalling Memory Positions (Auto Memory Recall) The Auto (Automatic) Memory Recall feature automatically recalls the current driver 's previously stored "1" or "2" position when entering the vehicle. Depending upon the Auto Memory Recall feature enabled in the vehicle personalization menu, memory "1" or "2" positions are recalled in the following ways: To activate the recall when On Driver Door Open is selected in the personalization menu, do one of the following: . Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat, outside mirrors, and the power tilt and telescoping steering column (if equipped) to the desired driving positions. 2. Press and holdSET and "1" at the same time until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." To save positions to the B (Exit) button and easy exit features: 1. Adjust the driver seat, power tilt and telescoping steering column (if equipped), and the outside mirrors on some vehicles to the desired positions for getting out of the vehicle. 2. Press and hold SET and B at the same time until a beep sounds. On vehicles with RKE, press K on the RKE transmitter and open the driver door. On vehicles with Keyless Access, press the lock/unlock button on the outside driver door .