2014 Chevrolet Impala Owner Manual - Page 346

10-72 Vehicle Care 3. Press p then scroll w or until Jump Start displays. 4. Press start. x V to activate the jump 5. The system will then ask for confirmation. If Yes is selected, the jump start will begin and the display will show WAIT TO START. 6. When the jump start is complete, the display will show ATTEMPT START or JUMP START DISABLED. If the vehicle is started, the on-board jump start function will be automatically disabled. If the vehicle cranks but does not start, the procedure may be repeated again. If the vehicle start is still unsuccessful, the jump start can be attempted using the following jump starting procedure under "Jump Starting (with or without eAssist)." On-board jump starting may be unavailable due to the 12-volt battery charge level, the eAssist battery charge level, power capability, or an issue with the eAssist system. In these cases, the display will not be available because of the power issue, or the DIC will display JUMP START DISABLED SEE OWNERS MANUAL. Warning (Continued) . They contain gas that can explode or ignite. They contain enough electricity to burn you. . Jump Starting (with or without eAssist) For more information about the vehicle battery, see Battery on page 10-27. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. If you do not follow these steps exactly, some or all of these things can hurt you. { Caution Ignoring these steps could result in costly damage to the vehicle that would not be covered by the vehicle warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle. The vehicle has a battery cover which must be removed to gain access to the battery for jump starting. { Warning Batteries can hurt you. They can be dangerous because: . They contain acid that can burn you. (Continued)