2003 Lincoln Navigator Owner Guide 1st Printing (Spanish) - Page 730

Maintenance and Specifications Ford Part Application Capacity Name Motorcraft SAE Conventional 2.13L (4.5 pints) Rear axle lubricant 4 75W-90 Fuel differential Efficient High (9.75 inch Performance axle) Synthetic Rear Axle Lubricant 2.01L (4.25 pints)5 Motorcraft SAE Limited-slip 75W-140 High differential Performance (9.75 inch Synthetic Rear axle)5 Axle Lubricant Windshield Motorcraft All 4.1L (4.5 quarts) washer fluid Premium Windshield Washer Concentrate 1 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance guide to determine the correct service interval. Some transmission fluids may be labeled as dual usage, such as MERCON௡ and MERCON௡ V. These dual usage fluids are not to be used in an automatic transmission that requires use of the MERCON௡ type fluid. However, these dual usage fluids may be used in transmissions that require the MERCON௡ V type fluid. MERCON௡ and MERCON௡ V type fluids are not interchangeable. DO NOT mix MERCON௡ and MERCON௡ V. Use of a transmission fluid that indicates dual usage (MERCON௡ and MERCON௡ V) in an automatic transmission application requiring MERCON௡ may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. 2 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 339 Fluid