Adaptec ANA-62022 User Guide - Page 53
Configuring the Ports in Windows NT 4.0, these steps
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
DuraLAN Fast Ethernet NICs User's Guide 4 Select the speed for the connection. The default selection is Autodetect. Note: We recommend that you leave all property value as default value unless the modification is really necessary. Autodetect will automatically select the appropriate speed for the Adaptec DuraLAN NIC you have installed. 5 Repeat Steps 3 and 4 for other existing ports as required. 6 Click OK. Configuring the Ports in Windows NT 4.0 In the Adaptec New Hardware Found window, each port is assigned to Autodetect, the default connection type that will always detect port connection and negotiate a compatible speed and transmission mode. To configure the Standalone driver ports in Windows NT 4.0 and select the connection type for your Adaptec DuraLAN NIC, follow these steps: Note: If you are required to insert the Windows NT CD, you must reinstall the latest version of the Microsoft Windows NT Service Pack, then restart the system. 1 In the Adaptec New Hardware Found window, make sure all the DuraLAN NIC ports appear. 4-4